If Cell String Meets Criteria Then Clear Contents From Array On Same Row

Jul 17, 2013

I'm attempting to clear the contents from a range of cells on rows where a cell string may equal R, X, XX, Y, Z, ZX, #N/A.
The macro runs fine until it gets to a cell that contains #N/A. How to get this to work?

Sub Recalculate()
Dim r As Integer
r = ActiveSheet.UsedRange.Rows.Count

I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")

This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'. e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?

I have a spreadsheet with data to row 5000. I have column Y that has an "X" in it. I would like some VBA code to look at each row up to 5000, in column Y for the "X". If it is there, clear the cell contents on the current row in columns T, U, and V.

I've tried modifying some existing code (excluding the Y column range of 5000) but keep getting a "Compile error: Wrong number of arguments or invalid property assignments". How do I set the 5000 limit and get this code back on track?

Sub RemoveBankDelay() n = WorksheetFunction.CountIf(Range("Y:Y"), "X") For i = 1 To n

I have a 700 line spreadsheet and would like to delete the cell next to another cell if it contains a certain string. I.e if A1 to A3 equals "Test" then i would like to delete the contents of B1 to B3, But if A2 equals "Completed" then only B1 and B3 should be cleared.

I need some code that will clear the contents of a Row Range(C:T) if either of the contents of cells X and Y = "E"

The code needs to look at cells X17 and Y17 and continue looking until it gets to X216 and Y216

So - If X = E but Y does not, then the row range C:T must be cleared. If Y = E but X does not, then the row range C:T must be cleared If both X and Y = E, then the row range C:T must be cleared

If the letter E does not exist in either X or Y, then the row must be left alone

i am trying to get my excel formula to say if 2 date ranges in my excel workbook are the same (in seperate worksheets) to put a value from a certain cell into another cell in another worksheet. This is all in the same excel application...

The first step i have taken are:

1) if the 2 date ranges are the same to say 'true' if not 'false'

I am trying to get a forumula to say "if it is true to put a value from a different cell into another cell (both in different worksheets) but the same excel application...? but if its false to move on to the next date

I am trying to come up with a simple formula to count a single cell if it contains either a 2 or 3.

The cell can contain numbers ranging from 0-8.

Even better would be if I could some how evaluate single cells based on the contents and then count the number of cells where the criteria for contents is true. The problem is the criteria differs from cell to cell (i.e. D2 could = 2 or 3, but E2 needs to be counted only if it contains a 4 or 5).

I know COUNTIFS only evaluate a range but it would be perfect if I could somehow get it to work for single cells. COUNTIFS(D2,2,D2,3,E2,3,E2,4,F2,2)

Say I have a column of cells filled with numbers that are ascending. What I would like to do is to pick out the first cell that meets my condition. For instance, these cells contain irrational numbers that increase from 0 to 100. I would like a formula to pick out the first cell that exceeds 10.2, and to return the row number of that cell.

In the case of descending numbers, if I would like to pick out the first cell that goes below 10.2, would the formula be the same?

Is it possible using vba code to clear a specific cell's contents? I have a workbook that has text boxes that need the linked cell cleared when the workbook opens so the user can start fresh with empty text box's.

We were so close!. But it appears that the assumed correct answer only works if there are no repeating N. The repeating N gets the same count as the last Y and it throws off the sum ....

Iīm trying to do a macro that changes the color of all fonts in a row if the cell in the column "R" has the date lower than a specific one, something like this:

Dim Data2 As Date Data2 = Sheets("Sheet1").Range("today") Range("R12").Select Do While ActiveCell <> "" If ActiveCell < Data2 Then ActiveCell.EntireRow.Select Selection.Font.ColorIndex = 3 Else ActiveCell.Offset(1, 0).Activate End If Loop

But it just donīt work. The macro does that in the first row, than it stops. Do you have another code for this, or another way to do?

In the picture below, I need a formula in column E to count the unique occurrences in column A (excluding blanks) if its corresponding value in column B (B1 value) matches that in column D (B2 value). Currently column E is showing the values I would want the formula to return.

Capture.PNG

At the moment I have a formula as below:

=SUMPRODUCT(--(B:B=$D2),--(A:A<>""))

this will do a countif in column A if column B matches the value in column D, but would not weed out duplicates for me.

Modifying my formula. I have attached the sample workbook below.

I'm trying to clear cell contents based on a defined name given to a set of various cells in my worksheet. The cells are not continuous, but since they're given that defined name, I don't think it matters.

The defined name is listed as "CommentsFields". The worksheet name is listed as "QPRForm_V6"

I found a similar thread, but cannot get it to work with what I'm looking for. I'm relatively new to writing VBA/macros, so I'm not sure what to do.

Is is possible to clear the contents of a cell range if a message box appears stating an error. I have tried the following code but the logic doesn't actually work and am struggling to achieve what I am trying to do.

My code so far is as follows:

Code:

If ActiveSheet.Range("F84") > 0 And ThisWorkbook.Worksheets("PES").Range("D24") = 0 Then _ MsgBox "Your Entitlement is currently 0", vbCritical, "Error" ActiveSheet.Range("K84:T84").ClearContents

The message box appears fine if the IF statement is true but if IF statement is false, the cell range of K84 to T84 on the current sheet is still cleared..

If I have a pick list, or drop-down list, in cell B21 and one of the options in that list is "Clear", how can I get the contents of cell C21 to be cleared when I select the "Clear" option in B21?

Constraint... Don't want to use VBA.

I am thinking of hiding a formula somewhere other than in C21 that evaluates B21 and does an If Then kind of deal to clear C21.

I am trying to populate a cell based on which number meets the criteria I define. This is based on sales revenue, so if the revenue is less than $6.5M, I want to use a certain value. If the value is equal to $6.5M but less than $8M I want to use another value and finally if the revenue is greater than $8M i want to use another value. Here's my formula, but it returns $0.

I have created a worksheet with many calculations based on user input into several unlocked cells. I would like to create a cell that when selected, would clear the contents of this group of unlocked cells.

I'm trying to create macro that will clear the contents of the cells in the 4 columns to the left of a cell that = 0 %, as well as the cell that = 0%. For example, if cell F13 = 0 % then the contents of B13:F13 would need to be cleared. The range in which data is being pasted into is B13:F27.

Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.

i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows

I am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.

I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..